ORL12 Handset lifter works with Sennheiser wireless headsets Contents in the box: 1. ORL12 handset lifter 2. Microphone (ring detector) 3. Cable with two RJ11 4. Instruction manual 5. Easy adapting kit (extender arm) 6. Foam blocks (stopper) 7. Double-sided adhesive tape How to set up: Check Out the Video! https://www.youtube.com/watch?v=CL0xyTmqil0 1) Plug the cord with a pink sticker into the top of the lifter 2) Plug the order end into the pink ACC port in the back of the cube 3) Before removing the stick tape from lifter, put it over the speaker of the phone that get a good idea of where exactly it should go 4) Remove sticky tape (make sure to remove round sticky tape from the bulit in mic as well) 5) Stick lifter onto the phone 6) Unplug curly cord from back of the phone (or side), then plug it into the handset port in the back of the headset base 7) Make sure the green phone port has the connector cord plugged in, then plug the other end into the handset port in the back of the…